2004 Aprilia RS125

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Front wheel bearing slightly noisy

Steering headbearing has slight free play (2.2.2 (f) (i))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Front Tyre not fitted in accordance with side wall instructions Tyre fitted backwards (5.2.3 (i))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Exhaust markings indicating not for road use or similar wording (6.1.2 (c))

Offside Rear Brake pedal has insufficient reserve travel (1.1.2 (a))

Rear Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) DANGEROUS

Drive chain worn but not considered excessive (6.2.1e)

Front Drive chain sprocket slightly worn (6.2.1e)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Headlamp aim too high and too far to the left. (1.6)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front wheel bearings are slightly rough (2.3.5b)

Front wheel bearings have slight free play (2.3.5b)

Drive chain excessively tight (6.2.1d)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Offside Handlebar mounting clamp bolt loose (2.1.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front wheel bearings are slightly rough (2.3.5b)

Front wheel bearings have slight free play (2.3.5b)