2003 Rieju RS2 50

Central Rear Registration plate does not conform to the specified requirements Plate too small (0.1 (d))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Nearside Footrest slightly loose Gear selector (6.2.12 (a))

Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust slightly deteriorated (7.1.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear suspension component slightly corroded. (2.4.A.1a)

side stand mounting loose but secure

Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Direction indicators flashing more than 120 times per minute (1.5.1c)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust slightly deteriorated (7.1.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear suspension component slightly corroded. (2.4.A.1a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

side stand mounting loose but secure

Front Roller brake test indicates a severely grabbing brake (3.3.A1b)

Front position lamp does not face the front (1.1.1d)

Nearside Rear suspension fouling which affects the movement of the rear suspension (2.4.A.3a)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Registration plate deteriorated (6.3.1d)

Nearside Steering lock stop missing (2.1.3) DANGEROUS

Rear shock absorber has inadequate damping effect. (2.4.A.3b)