MOT Status
ExpiredMileage
100,564 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Rear Inner Seat belt anchorage prescribed area is corroded but not considered excessive sills both sides (7.1.1 (a) (i))
Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))
n/s/r and o/s/r sill covers fitted cannot inspect outer sills
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a))
Offside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front tyre wearing on inner and outer edges also tyre worn to 1.6mm
Offside Rear Child Seat fitted not allowing full inspection of adult belt ()
Nearside Front Front position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)
Nearside Rear Outer Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear Outer Brake pad(s) less than 1.5 mm thick (3.5.1g)
Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front tyre wearing on inner and outer edges also tyre worn to 1.6mm
Offside Rear Child Seat fitted not allowing full inspection of adult belt ()
Front Suspension arm has slight play in a pin/bush both sides wishbone (2.4.G.2)
Rear Brake pad(s) wearing thin both sides (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Centre Rear Registration plate lamp not working (1.1.C.1d)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
near side front tyre 3/2mm
off side front tyre 4/2mm
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BP05 DDY is a 2005 Mazda 3 in Blue with a 1,598cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 66.7%.
Across all 2005 Mazda 3 models, the average MOT pass rate is 74.0% with a typical mileage of 71,203 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying BP05 DDY, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 21 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BP05 DDY?
You can check the full history of BP05 DDY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BP05 DDY registered?
BP05 DDY is a 2005 Mazda 3, first registered on 15 August 2005.
Is BP05 DDY safe to buy?
The MOT history for BP05 DDY shows 15 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BP05 DDY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BP05 DDY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.