2013 Honda Ww 125-D

Front Brake binding but not excessively (1.2.1 (f))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

some damaged panels

Front Brake binding but not excessively (1.2.1 (f))

Registration plate insecure (0.1 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

some damaged panels

Rear Bearing noise , no play

Exhaust slightly loose two of the three exhaust mounting brackets have rotted through, but is still secured with remaining bracket. there is also a bolt missing from the secondary mounting plate to engine. exhaust does not leak and remains secure at time of test. (6.1.2 (a))

Riders seat slightly loose front hinge mount of seat has poor repair, but remains secure when seat is closed. (6.2.5 (a) (ii))

centre stand partially seized and sticks down when pushed off .

rear drive very noisy.

Front Brake binding but not excessively (1.2.1 (f))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Nail in tyre screw in rear tyre ()

Rear drive bearings sound noisy but no freeplay at time of test

Rear Nail in tyre ()

Rear Tyre worn close to the legal limit (4.1.3(ii))

rear brake failed to lock rollers on brake test,adjustment could be required,but passed brake test due to linked system.

Front Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Nail in tyre ()

Rear Tyre worn close to the legal limit (4.1.3(ii))

rear brake failed to lock rollers on brake test,adjustment could be required,but passed brake test due to linked system.

Steering movement slightly 'notchy' (2.2.1b)