2013 Yamaha Wr 125 X

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Stop lamp remains on when the brakes are released (4.3.2 (a) (iii))

Rear Brake excessively binding (1.2.1 (f))

Exhaust noisy (8.1.1 (a))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

front wheel has slight run out

Chain guard missing ()

Clutch lever bent (6.2.7 (b))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front brake light switch works intermittently

Park light bulb inoperable

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Chain guard missing ()

Clutch lever bent (6.2.7 (b))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front brake light switch works intermittently

Park light bulb inoperable

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Clutch lever bent (6.2.7 (b))

Central Rear Tyre worn close to the legal limit rear tyre low tread 2mm (4.1.3(ii))

Front Front shock absorber has light misting of stanchion both front fork seals slight misting of oil (2.3.3)

Central Front Tyre tread depth is below minimum requirements of 1.0mm front tyre below limit (4.1.3(ii))

Offside Rear Brake component is severely distorted rear disc badly warped (3.1.5)

Central Rear Tyre worn close to the legal limit rear tyre low tread 2mm (4.1.3(ii))

Front Front shock absorber has light misting of stanchion both front fork seals slight misting of oil (2.3.3)

Clutch lever bent

Forks twisted slightly

Rear brake beginning to bind