MOT Status
ExpiredMileage
114,919 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Macpherson strut damaged but not seriously weakened (5.3.3 (b) (i))
Offside Front Macpherson strut damaged but not seriously weakened (5.3.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm damaged but not seriously weakened (5.3.3 (b) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Nail in tyre ()
Offside Rear slight cracking
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Position lamp not working (4.2.1 (a))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Suspension rod pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a))
Offside Rear Suspension rod pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Nail in tyre ()
Offside Rear slight cracking
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Rear Suspension arm has excessive play in a pin/bush (2.4.G.2)
Registration plate lamp not working (1.1.C.1d)
Child Seat fitted not allowing full inspection of adult belt ()
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Exhaust backbox corroded
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
nearside rear tyre on 2.5mm tread
Exhaust has a minor leak of exhaust gases (7.1.2)
Rear Brake pad(s) wearing thin (3.5.1g)
exhaust deteriorated
offside front tyre worn on inner edge
offside number plate light faulty
Nearside Steering pivot point has slight play (2.2.B.1g)
Offside Steering pivot point has slight play (2.2.B.1g)
How Reliable is the Dodge Caliber?
Based on 69,277 MOT tests across 4,774 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BL06 HRM is a 2006 Dodge Caliber in Silver with a 1,998cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 70%.
Across all 2006 Dodge Caliber models, the average MOT pass rate is 66.1% with a typical mileage of 65,485 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Dodge Caliber fails its MOT is suspension arm has excessive play in a ball joint, accounting for 3,411 recorded failures. If you're considering buying BL06 HRM, it's worth having these areas checked by a mechanic before committing.
The Dodge Caliber typically stays on UK roads for around 20 years. At 20 years old, this Dodge Caliber is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BL06 HRM?
You can check the full history of BL06 HRM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BL06 HRM registered?
BL06 HRM is a 2006 Dodge Caliber, first registered on 29 July 2006.
Is BL06 HRM safe to buy?
The MOT history for BL06 HRM shows 20 tests with a 70% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BL06 HRM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BL06 HRM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.