MOT Status
ExpiredMileage
141,220 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Seat belt anchorage prescribed area is excessively corroded seat mounting (5.2.6)
Nearside Rear Suspension component mounting prescribed area is excessively corroded suspension mounting (2.4.A.3)
Nearside Rear Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Rear Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a) DANGEROUS
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Offside Front Brake hose excessively chafed (3.6.B.4d) DANGEROUS
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside rear tyre worn low on outer shoulder.
Offside Front Tyre worn close to the legal limit worn smooth on inside edge. (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive suspension mounting (2.4.A.3)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Child seat fitted not allowing full inspection of adult belt
Nearside Rear Valve stem slightly damaged (4.1.D.1e)
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Child seat fitted not allowing full inspection of adult belt
Nearside Rear Valve stem slightly damaged (4.1.D.1e)
Child seat fitted not allowing full inspection of adult belt
Engine covers fitted obscuring some components in the engine bay
Under-trays fitted obscuring some underside components
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear Mechanical brake component has restricted free movement (3.5.1k)
Windscreen washer provides insufficient washer liquid (8.2.3)
Child seat fitted not allowing full inspection of adult belt
Engine covers fitted obscuring some components in the engine bay
Front Brake pad(s) wearing thin (3.5.1g)
Under-trays fitted obscuring some underside components
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Under-trays fitted obscuring some underside components
o/s/f tyre has cut in side wall but not showing ply or cords and wearing on edges
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front position lamp(s) not working (1.1.A.3b)
Parking brake: efficiency below requirements (3.7.B.7)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Under-trays fitted obscuring some underside components
Child seat fitted not allowing full inspection of adult belt
Child seat o/s/rear , as above.
Front Brake pad(s) wearing thin (3.5.1g)
Offside Headlamp not working on dipped beam (1.7.5a)
Child seat fitted not allowing full inspection of adult belt
Child seat o/s/rear , as above.
Front Brake pad(s) wearing thin (3.5.1g)
front registration plate slightly damaged
Rear Exhaust system not adequately supported (7.1.1)
front registration plate slightly damaged
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Headlamp aim too low (1.8)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
electronic headlamp adjuster offside noisy
exhaust corroded
front number plate cracked
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear Brake hose twisted (3.6.B.4c)
exhaust corroded
front number plate cracked
tyres wearing unevenly
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BL03 FYW is a 2003 Mazda 6 in Blue with a 1,999cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 52.9%.
Across all 2003 Mazda 6 models, the average MOT pass rate is 71.6% with a typical mileage of 83,392 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying BL03 FYW, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 23 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BL03 FYW?
You can check the full history of BL03 FYW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BL03 FYW registered?
BL03 FYW is a 2003 Mazda 6, first registered on 30 June 2003.
Is BL03 FYW safe to buy?
The MOT history for BL03 FYW shows 17 tests with a 52.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BL03 FYW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BL03 FYW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.