MOT Status
ExpiredMileage
202,350 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
FRONT AND REAR BRAKE DISCS WORN
HANDBRAKE TRAVEL HIGH
NS AND OSR LOWER ARMS CORRODED
NSR TYRE HAS NAIL IN INNER EDGE
OS AND NS REAR TRAILING ARM BUSHES DETERIORATED
OSF CHASSIS CORRODED
OSF F LOWER BALL JOINT BOOT SPLIT
REAR ANTI ROLL BAR CORRODED
REAR SUBFRAME CORRODED
oil leak
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings NSR OUTER SILL (6.1.B.2)
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings OSR INNER SILL HOLED BY EXCESSIVE CORROSION (6.1.B.2)
Stop lamp not working NSR STOP LIGHT (1.2.1b)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Tyre has a lump, caused by separation or partial failure of its structure OSR TYRE (4.1.D.1b)
FRONT AND REAR BRAKE DISCS WORN
HANDBRAKE TRAVEL HIGH
NS AND OSR LOWER ARMS CORRODED
NSR TYRE HAS NAIL IN INNER EDGE
OS AND NS REAR TRAILING ARM BUSHES DETERIORATED
OSF AND NSF TYRES CLOSE TO LEGAL LIMIT AND WEARING ON EDGES
OSF CHASSIS CORRODED
OSF F LOWER BALL JOINT BOOT SPLIT
REAR ANTI ROLL BAR CORRODED
REAR SUBFRAME CORRODED
OIL LEAK
Engine covers fitted obscuring some components in the engine bay
Nail in nearside rear tyre
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Under-trays fitted obscuring some underside components
exhaust system corroded
Oil leak
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front Power steering component(s) inappropriately repaired (2.3.7)
Offside Front Shock absorber has a serious fluid leak (2.7.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Engine covers fitted obscuring some components in the engine bay
Nail in nearside rear tyre
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Headlamp aim too high (1.8)
Nearside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Under-trays fitted obscuring some underside components
exhaust system corroded
Oil leak
1.n/s/f tyre wear on inner edge 2.exhaust system corroded
Engine covers fitted obscuring some components in the engine bay
Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Sub-frame corroded but not seriously weakened (2.4.G.1)
Under-trays fitted obscuring some underside components
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Brake hose twisted (3.6.B.4c)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front coil spring broken (2.4.C.1a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside front brake binding (3.7.B.1)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
1.n/s/f tyre wear on inner edge 2.exhaust system corroded
Engine covers fitted obscuring some components in the engine bay
Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Sub-frame corroded but not seriously weakened (2.4.G.1)
Under-trays fitted obscuring some underside components
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Vehicle structure has slight corrosion (6.1.A.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Brakes imbalanced across an axle (3.7.B.5b)
Parking brake: efficiency below requirements (3.7.B.7)
Offside Front Ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Brake pads all round may require changing as low but estimate above limit of 1mm
Child seat fitted not allowing full inspection of adult belt
Nearside Front Front position lamp(s) not working (1.1.A.3b)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BL03 FYS is a 2003 Mazda 6 in Grey with a 1,998cc diesel engine. This vehicle has been through 16 MOT tests with a personal pass rate of 68.8%.
Across all 2003 Mazda 6 models, the average MOT pass rate is 71.6% with a typical mileage of 83,392 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying BL03 FYS, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 23 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BL03 FYS?
You can check the full history of BL03 FYS by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BL03 FYS registered?
BL03 FYS is a 2003 Mazda 6, first registered on 9 June 2003.
Is BL03 FYS safe to buy?
The MOT history for BL03 FYS shows 16 tests with a 68.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BL03 FYS have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BL03 FYS. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.