MOT Status
ExpiredMileage
96,639 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced chassis and inner sill areas heavy corrosion (6.1.1 (c) (i))
Bonnet cannot be secured in the closed position (3.1 (b) (i))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced chassis and inner sill areas heavy corrosion (6.1.1 (c) (i))
Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii))
Coil spring corroded all (5.3.1 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced sill areas corroding and covers fitted (6.1.1 (c) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner sills and rear chassis areas both sides (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Coil spring corroded all (5.3.1 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced sill areas corroding and covers fitted (6.1.1 (c) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner sills and rear chassis areas both sides (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Headlamp lens seriously defective (4.1.1 (b) (ii))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Offside Rear Brake pipe corroded, covered in grease or other material into brake hose (1.1.11 (c))
Rear Wheel bearing has slight play both sides (5.1.3 (a) (i))
Welded repair obscured by covering panel and underseal
front and rear suspension components heavily corroded
suspension subframe lower brace holed/corroded
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Brake pipe corroded, covered in grease or other material into brake hose (1.1.11 (c))
Rear Wheel bearing has slight play both sides (5.1.3 (a) (i))
front and rear suspension components heavily corroded
suspension subframe lower brace holed/corroded
Offside Rear wheel bearing has slight play (2.6.2)
both rear inner sills corroded
engine management light on
front sub frame lower bracew corroded
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)
Offside Rear wheel bearing has slight play (2.6.2)
both rear inner sills corroded
engine management light on
front sub frame lower bracew corroded
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
engine management light on
travel on service brake(footbrake)
underside of vehicle,rear axel and suspension corroded
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Stop lamp not working (1.2.1b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
engine management light on
travel on service brake(footbrake)
underside of vehicle,rear axel and suspension corroded
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Horn not working (1.6.2a)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
N/S mirror glass missing
Slight damaged N/S/F wheel
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside front brake binding (3.7.B.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
N/S mirror glass missing
Slight damaged N/S/F wheel
Nail in offside rear tyre
Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
front brake application uneven (3.7.B.2)
front brakes release unevenly (3.7.B.4)
Nearside front brake binding (3.7.B.1)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
n/s/f wheel bearing not checked
Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Daihatsu Yrv?
Based on 40,200 MOT tests across 2,927 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BL02 AFN is a 2002 Daihatsu Yrv in Red with a 1,298cc petrol engine. This vehicle has been through 29 MOT tests with a personal pass rate of 58.6%.
Across all 2002 Daihatsu Yrv models, the average MOT pass rate is 72.1% with a typical mileage of 55,518 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Daihatsu Yrv fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,732 recorded failures. If you're considering buying BL02 AFN, it's worth having these areas checked by a mechanic before committing.
The Daihatsu Yrv typically stays on UK roads for around 25 years. At 24 years old, this Daihatsu Yrv is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BL02 AFN?
You can check the full history of BL02 AFN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BL02 AFN registered?
BL02 AFN is a 2002 Daihatsu Yrv, first registered on 1 August 2002.
Is BL02 AFN safe to buy?
The MOT history for BL02 AFN shows 29 tests with a 58.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BL02 AFN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BL02 AFN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.