MOT Status
ExpiredMileage
129,561 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front + Rear suspension components have surface corrosion
Front suspension bushes perishing
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Subframe corroded
All front and rear suspension bushes perishing
General under body surface corrosion
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm ball joint excessively worn lower arm ball joint (5.3.4 (a) (i))
All front and rear suspension bushes perishing
General under body surface corrosion
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge on 1.6mm limit (5.2.3 (e))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge on 1.6mm limit (5.2.3 (e))
wipers juddering
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pad(s) wearing thin Approx 2mm (1.1.13 (a) (ii))
Sump pan corroded and pourous
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Position lamp not working (4.2.1 (a) (ii))
Items removed from driver's view prior to test ()
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pad(s) wearing thin Approx 2mm (1.1.13 (a) (ii))
Sump pan corroded and pourous
Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BJ61 MXW is a 2011 Mazda 3 in Silver with a 1,598cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 75%.
Across all 2011 Mazda 3 models, the average MOT pass rate is 77.9% with a typical mileage of 64,021 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying BJ61 MXW, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 15 years old, this Mazda 3 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BJ61 MXW?
You can check the full history of BJ61 MXW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BJ61 MXW registered?
BJ61 MXW is a 2011 Mazda 3, first registered on 17 October 2011.
Is BJ61 MXW safe to buy?
The MOT history for BJ61 MXW shows 16 tests with a 75% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BJ61 MXW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BJ61 MXW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.