MOT Status
ValidMileage
118,600 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear wiper blade defective
Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
general underbody corrosion
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear wiper blade defective
Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
general underbody corrosion
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Rear REAR SUBFRAME CORRODED ALL OVER
car have age rust
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
car have age rust
Nearside Front Tyre worn close to legal limit/worn on edge 3.5mm (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge 3.0mm (5.2.3 (e))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
nearside wiper blade split
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BJ61 GMY is a 2011 Mazda 3 in Black with a 1,598cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 70.6%.
Across all 2011 Mazda 3 models, the average MOT pass rate is 77.9% with a typical mileage of 64,021 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying BJ61 GMY, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 15 years old, this Mazda 3 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BJ61 GMY?
You can check the full history of BJ61 GMY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BJ61 GMY registered?
BJ61 GMY is a 2011 Mazda 3, first registered on 17 October 2011.
Is BJ61 GMY safe to buy?
The MOT history for BJ61 GMY shows 17 tests with a 70.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BJ61 GMY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BJ61 GMY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.