2003 Toyota MR2

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Service brake lagging in operation (1.2.1 (d))

Nearside Rear Tyre tread depth below requirements of 1.6mm 215/45/16 (5.2.3 (e)) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Items removed from driver's view prior to test ()

Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Macpherson strut mounting corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor/chassis (5.3.6 (a) (i))

Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Macpherson strut mounting corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front spot lamp lens misssing

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor/ chassis (5.3.6 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

covers and undertrays fitted

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Coil spring corroded (5.3.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Headlamp lens slightly defective (4.1.1 (b) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake inoperative on one side (1.4.1 (a))

Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Body has slight corrosion (6.1.B.2)

Offside Front coil spring broken (2.4.C.1a)

Parking brake: efficiency below requirements (3.7.B.7)

rear parking brake recording little or no effort (3.7.B.6a)

Body has slight corrosion (6.1.B.2)

Front registration plate faded but not likely to be misread (6.3.1d)

Front wiper blades split but still clear windsreen

Nearside Front suspension has slight deterioration of the bonding between metal and flexible material of an upper support bearing (2.5.B.3a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front suspension has slight deterioration of the bonding between metal and flexible material of an upper support bearing (2.5.B.3a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Front registration plate faded but not likely to be misread (6.3.1d)

Front wiper blades split but still clear windsreen

Nearside Front suspension has slight deterioration of the bonding between metal and flexible material of an upper support bearing (2.5.B.3a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front suspension has slight deterioration of the bonding between metal and flexible material of an upper support bearing (2.5.B.3a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Brakes imbalanced across an axle (3.7.B.5b)