2003 Lexus IS200

Bonnet cannot be secured in the closed position (8.4.1)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Outer Tyre has a bulge, caused by separation or partial failure of its structure wall (4.1.D.1b)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Wheel nut(s) missing (4.2.A.1e)

Offside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Outer Body has slight corrosion sill (6.1.B.2)

Nearside Rear tyre has multiple cuts on outer wall

Offside Rear Outer Body has slight corrosion sill (6.1.B.2)

Offside headlight aim cloudy

Rear subframe components rusty

all four tyre valves deteriorated

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

n/s/f tyre low on edges

Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Rear Drive shaft which forms part of the suspension coupling gaiter damaged, but preventing the ingress of dirt (2.4.G.4e)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Rear Drive shaft which forms part of the suspension coupling gaiter damaged, but preventing the ingress of dirt (2.4.G.4e)

n/s/f tyre low on edges

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside front brake binding slightly

Nearside front tyre wearing on the inner and outer edges

Offside Front Ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside rear brake disc corroded on the inside edge

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

front pads getting low

brake fluid low inbetween max and min

front tyres inner edges scrubbing off

front tyres on inner edge close to limmit

rear pads seem low

Front registration plate deteriorated (6.3.1d)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

brake fluid low inbetween max and min

front tyres inner edges scrubbing off

front tyres on inner edge close to limmit

rear pads seem low

both front wipers slightly split

front numba plate starting to deterate

n/s/f tyre slightly misshaped

n/s/r tyre 2mm

o/s/f tyre 2mm inside edge

slight knock from front suspension?

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)