MOT Status
ExpiredMileage
115,558 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))
Nearside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch area with in 30cm of anchorage (7.1.1 (a) (i))
Offside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced very heavily corroded though out under side of vehicle (6.1.1 (c) (i))
sill covers and under trays fitted to vehicle
Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
rear suspension components corroded
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Tyre worn close to legal limit/worn on edge bald on inner edge (5.2.3 (e))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Oil leak, but not excessive sump corroded (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Tyre worn close to legal limit/worn on edge bald on inner edge (5.2.3 (e))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Oil leak, but not excessive sump corroded (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Position lamp not working (4.2.1 (a))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Front Tyre worn close to the legal limit 2.3mm (4.1.E.1)
Offside Front Tyre worn close to the legal limit 2.0mm (4.1.E.1)
Offside Rear Tyre worn close to the legal limit 2.8mm (4.1.E.1)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Front Nail in tyre ()
Nearside Front Tyre worn close to the legal limit 2.3mm (4.1.E.1)
Offside Front Tyre worn close to the legal limit 2.0mm (4.1.E.1)
Offside Rear Tyre worn close to the legal limit 2.8mm (4.1.E.1)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
under trays and engine covers fitted
Engine covers fitted obscuring some components in the engine bay
Under-trays fitted obscuring some underside components
Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Engine covers fitted obscuring some components in the engine bay
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Under-trays fitted obscuring some underside components
Engine covers fitted obscuring some components in the engine bay
Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Under-trays fitted obscuring some underside components
Engine covers fitted obscuring some components in the engine bay
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Under-trays fitted obscuring some underside components
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BJ07 KUC is a 2007 Mazda 3 in Silver with a 1,349cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 68.8%.
Across all 2007 Mazda 3 models, the average MOT pass rate is 74.7% with a typical mileage of 68,986 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying BJ07 KUC, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 19 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BJ07 KUC?
You can check the full history of BJ07 KUC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BJ07 KUC registered?
BJ07 KUC is a 2007 Mazda 3, first registered on 29 March 2007.
Is BJ07 KUC safe to buy?
The MOT history for BJ07 KUC shows 16 tests with a 68.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BJ07 KUC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BJ07 KUC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.