2004 Mazda 3

Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Oil leak ()

underbody corroded

Nearside Registration plate lamp not working (1.1.C.1d)

Offside rear brake application uneven (3.7.B.2)

Offside rear parking (secondary) brakes imbalanced (3.7.B.6b)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Oil leak ()

Rear brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

underbody corroded

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

underbody corroded

All position lamps not working (1.1.A.3b)

Front registration plate fitted to the front does not have black characters on a white background (6.3.2a)

Nearside Front Lower Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Stop lamp not working (1.2.1b)

Registration plate lamp not working both (1.1.C.1d)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

underbody corroded

Front Brake lining(s) wearing thin (3.5.1g)

corrosion in progres

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Registration plate lamp not working (1.1.C.1d)

Front Brake lining(s) wearing thin (3.5.1g)

corrosion in progres

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Headlamp cleaning device inoperative (1.7.2)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Engine covers fitted obscuring some components in the engine bay

Items removed from driver's view prior to test

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

front number plate surround/holder damaged/insecure

surface corrosion to under side of vehicle

both front tyres are run flat type fitted to vehicle with out a tyre pressure monitoring system

Driver's door cannot be opened from inside the vehicle (6.2.B.1b)

Front registration plate insecure (6.3.1b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Engine covers fitted obscuring some components in the engine bay

Items removed from driver's view prior to test

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

both rear tyres heavly cracking

front number plate surround/holder damaged/insecure

surface corrosion to under side of vehicle

both front tyres are run flat type fitted to vehicle with out a tyre pressure monitoring system

both rear tyres cracking and uneven wear on edge 205 50r17

front and rear brake discs lipped

front brake pads low

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

front and rear brake discs lipped

front brake pads low

front wiper slightly smearing screen

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)