2003 Mbk Ovetto

Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp (1.2.2b(i))

Front Brake disc(s) excessively scored (3.2.A1l)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Front Stop lamp missing (1.3.3a)

Front position lamp deteriorated and function impaired (1.1.1b)

Headlamp aim too high (1.6)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Riders seat insecure (6.2.1a)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Stop lamp damaged and function impaired (1.3.3a)

Headlamp aim too high (1.6)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Offside Front Direction indicator flashing more than 120 times per minute (1.5.1c)

Offside Rear Direction indicator flashing more than 120 times per minute (1.5.1c)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) DANGEROUS

Fixing bolt missing ,exhaust front pipe to cylinder head not insecure at time of test.

Front Fairings insecure but not likely to impede the steering (2.1.2e)

Stop light does not operate on front brake control, no wiring visible due to plastic panels

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear shock absorber has a light misting (2.4.A.1c)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Tyre valve stem slightly damaged (4.1.2c)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Tyre valve stem slightly damaged (4.1.2c)