MOT Status
ValidMileage
116,684 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bushes both (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill as marked (7.1.1 (a) (i))
Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill as marked (7.1.1 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bushes both (5.3.4 (a) (i))
Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Nail in tyre ()
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii))
Nearside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii))
Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Nail in tyre ()
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Upper Shock absorber has an excessively worn bush (2.7.4)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nail in nearside rear tyre
Nearside Front Headlamp aim too high (1.8)
Nail in nearside rear tyre
Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
child seat fitted to nearside rear. not allowing full inspection of belt
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BG55 WUU is a 2005 Mazda 3 in Blue with a 1,598cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 65.4%.
Across all 2005 Mazda 3 models, the average MOT pass rate is 74.0% with a typical mileage of 71,203 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying BG55 WUU, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 21 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BG55 WUU?
You can check the full history of BG55 WUU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BG55 WUU registered?
BG55 WUU is a 2005 Mazda 3, first registered on 29 October 2005.
Is BG55 WUU safe to buy?
The MOT history for BG55 WUU shows 26 tests with a 65.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BG55 WUU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BG55 WUU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.