2020 Honda Cbf

Exhaust noisy aftermarket end can fitted (8.1.1 (a))

Front Wheel has a slightly distorted bead rim o/s of rim (5.2.2 (c) (i))

Front brake lever bent but serviceable

Handlebar deformed but serviceable o/s (2.2.1 (c) (i))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Offside Front Footrest slightly loose return spring missing (6.2.12 (a))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Steering headbearing slightly stiff or notchy tight centre point (2.2.2 (f) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Exhaust system insecure Bracket loose & fitted directly to swinging arm (6.1.2 (a))

Headlamp aim too low (4.1.2 (a))

Horn not working (7.7 (a))

Rear Footrest missing R & L Rear passenger footrests missing (6.2.12 (a))

Rear Stop lamp not working (4.3.1 (a) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate does not conform to the specified requirements No lower margin - L Plate fitted over no plate (0.1 (d))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Wheel has a slightly distorted bead rim R/H/S Of front wheel slightly damaged (5.2.2 (c) (i))

Handlebar deformed but serviceable R/H/S Slightly bent back (2.2.1 (c) (i))

Nearside Front Shock absorber has a light misting of oil L/H/S Fork seal has slight leak (5.3.2 (b))

Offside Front Footrest slightly loose R/H/F Footrest has return spring missing & slightly bent back (6.2.12 (a))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Wheel alignment slightly misaligned (2.4 (a))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))