MOT Status
ExpiredMileage
124,373 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened Both sides (5.3.3 (b) (i))
Engine sump heavily rusted
Exhaust mounting defective Middle and rear mounts failed (6.1.2 (a))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Engine sump heavily rusted
Exhaust mounting defective Middle and rear mounts failed (6.1.2 (a))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive undersill (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive undersill (5.3.6 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
engine sump rusty
Front Suspension arm pin or bush worn but not resulting in excessive movement os & ns (5.3.4 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
rear exhaust hanger broken off
Front Brakes imbalanced across an axle (1.2.1 (b) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Rear Brake hose ferrule excessively corroded os & ns (1.1.12 (f) (i))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Suspension arm pin or bush worn but not resulting in excessive movement os & ns (5.3.4 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
rear exhaust hanger broken off
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive undersill/arch at front (5.3.6 (a) (i))
Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive undersill/arch at front (5.3.6 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear position lamp(s) not working (1.1.A.3b)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
areas of exhaust system corroding
nearside front tyre tread 1.8mm (1.6mm raised tread area)
offside and nearside under sill areas corroding
offside front tyre 2mm raised tread area
undercutting to front brake discs
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Offside Rear coil spring broken (2.4.C.1a)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
areas of exhaust system corroding
nearside front tyre tread 1.8mm (1.6mm raised tread area)
offside and nearside under sill areas corroding
offside front tyre 2mm raised tread area
undercutting to front brake discs
Rattle from N/S/R brake
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
play in handbrake lever
slight smearing wiper blades
undertrays fitted
front number plate slightly damaged
nsf tyre getting low
osf tyre on limit
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BF07 CJV is a 2007 Mazda 3 in Silver with a 1,598cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 70%.
Across all 2007 Mazda 3 models, the average MOT pass rate is 74.7% with a typical mileage of 68,986 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying BF07 CJV, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 19 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BF07 CJV?
You can check the full history of BF07 CJV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BF07 CJV registered?
BF07 CJV is a 2007 Mazda 3, first registered on 31 March 2007.
Is BF07 CJV safe to buy?
The MOT history for BF07 CJV shows 20 tests with a 70% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BF07 CJV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BF07 CJV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.