MOT Status
ValidMileage
82,453 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
All suspension components corroded
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Headlamp aim projected beam image is obviously incorrect Both headlights (4.1.2 (c))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (205/50r16) (5.2.3 (d) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced Forward subframe support bar rusted (6.1.1 (c) (i))
Exhaust has a minor leak of exhaust gases Center section (6.1.2 (a))
Front Suspension arm pin or bush worn but not resulting in excessive movement Both front upper arm bushes (5.3.4 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Suspension arm ball joint dust cover severely deteriorated Rear suspension arm (5.3.4 (b) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Suspension arm ball joint dust cover severely deteriorated Rear suspension arm (5.3.4 (b) (i))
Sub-frame is corroded but structural rigidity is not significantly reduced Front and rear subframes and suspension components (6.1.1 (c) (i))
Suspension components corroded
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Lower Suspension arm pin or bush excessively worn Rear bush (5.3.4 (a) (i))
Suspension components corroded
Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Service brake excessively binding (1.2.1 (f))
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Front both front tyre valve are slightly perish.
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Central Cross member corroded but not seriously weakened
General surface corrosion on rear suspension arms
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front coil spring broken (2.4.C.1a)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill (6.1.B.2)
Offside Front coil spring broken (2.4.C.1a)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill (6.1.B.2)
Nearside Front coil spring broken (2.4.C.1a)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front coil spring broken (2.4.C.1a)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Anti-roll bar linkage insecure (2.4.G.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Anti-roll bar linkage insecure (2.4.G.1)
How Reliable is the Mazda MX-5?
Based on 2,502,760 MOT tests across 160,823 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BF06 OBY is a 2006 Mazda MX-5 in Black with a 1,798cc petrol engine. This vehicle has been through 28 MOT tests with a personal pass rate of 60.7%.
Across all 2006 Mazda MX-5 models, the average MOT pass rate is 77.9% with a typical mileage of 54,492 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda MX-5 fails its MOT is seat belt anchorage prescribed area is excessively corroded, accounting for 44,475 recorded failures. If you're considering buying BF06 OBY, it's worth having these areas checked by a mechanic before committing.
The Mazda MX-5 typically stays on UK roads for around 36 years. At 20 years old, this Mazda MX-5 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BF06 OBY?
You can check the full history of BF06 OBY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BF06 OBY registered?
BF06 OBY is a 2006 Mazda MX-5, first registered on 1 March 2006.
Is BF06 OBY safe to buy?
The MOT history for BF06 OBY shows 28 tests with a 60.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BF06 OBY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BF06 OBY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.