MOT Status
ValidMileage
101,862 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Outer Arch has been tapped up, No sharp edges
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Nearside Rear Shock absorbers has negligible damping effect (5.3.2 (d))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Outer Arch has been tapped up, No sharp edges
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Central Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Emissions not tested (8.2.1.2 (d))
Nearside Front Service brake excessively binding (1.2.1 (f))
Offside Front Service brake excessively binding (1.2.1 (f))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Rear Brake hose has slight corrosion to ferrules both (3.6.B.4e)
Vehicle structure has slight corrosion (6.1.A.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
exhaust system badly corroded
undertray
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Rear Brake hose has slight corrosion to ferrules both (3.6.B.4e)
Vehicle structure has slight corrosion (6.1.A.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
exhaust system badly corroded
undertray
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Seat belt anchorage prescribed area is corroded but not considered excessive floors (5.2.6)
Vehicle structure has slight corrosion (6.1.A.1)
Nearside Inner Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Inner Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Vehicle structure has slight corrosion (6.1.A.1)
Nearside Outer Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Inner Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Inner Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Outer Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Vehicle structure has slight corrosion (6.1.A.1)
Body has slight corrosion (6.1.B.2)
Nearside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Under-trays fitted obscuring some underside components
Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Under-trays fitted obscuring some underside components
Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake pad(s) wearing thin (3.5.1g)
Front brake disc slightly pitted (3.5.1h)
Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
air con condenser damp
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda MX-5?
Based on 2,502,760 MOT tests across 160,823 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BF05 VVW is a 2005 Mazda MX-5 in Grey with a 1,839cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 73.7%.
Across all 2005 Mazda MX-5 models, the average MOT pass rate is 76.7% with a typical mileage of 56,278 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda MX-5 fails its MOT is seat belt anchorage prescribed area is excessively corroded, accounting for 44,475 recorded failures. If you're considering buying BF05 VVW, it's worth having these areas checked by a mechanic before committing.
The Mazda MX-5 typically stays on UK roads for around 36 years. At 21 years old, this Mazda MX-5 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BF05 VVW?
You can check the full history of BF05 VVW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BF05 VVW registered?
BF05 VVW is a 2005 Mazda MX-5, first registered on 19 March 2005.
Is BF05 VVW safe to buy?
The MOT history for BF05 VVW shows 19 tests with a 73.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BF05 VVW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BF05 VVW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.