2013 Alfa Romeo Mito

Brake performance unable to be tested Due to a significant brake fluid leak. (1.2.1 (g))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Inner Engine mounting bracket damaged or deteriorated resulting in excessive movement Engine stabiliser arm bush detached. (6.1.8 (a) (i))

Nearside Front Outer Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Inner Hydraulic brake cylinder leaking hydraulic fluid Brake master cylinder leaking. (1.1.16 (b) (i))

Offside Front Upper Brake fluid significantly below minimum mark (1.1.10 (d) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Inner Exhaust integral heat shield corroded and partially detached.

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear exhaust box badly corroded .

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Reversing lamp inoperative (4.6.1 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear exhaust box badly corroded .

Rear rear exhaust box deteriorated

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Exhaust back box corroded

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear silencer in poor rusty condition.

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear silencer in poor rusty condition.

Nearside Rear Tyre has ply or cords exposed caused by cut (5.2.3 (d) (ii)) DANGEROUS

Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))