2007 Honda CBR125

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front slightly spongy front brake

slight headstock play

Front Brake excessively binding (1.2.1 (f))

Headlamp aim not tested (4.1.2 (b))

Headlamp light source and lamp not compatible no beam pattern (4.1.4 (c))

Rear Stop lamp not working switch inop on rear brake (4.3.1 (a) (ii))

All direction indicators flashing less than 60 times a minute indicators led inop, not flashing just dim and light (4.4.4 (a))

Front brake lever slightly spongy

slight play headstock bearings

Front Brake lining(s) close to minimum limit (1.1.13 (a))

Rear Brake lining(s) close to minimum limit (1.1.13 (a))

Steering headbearing has slight free play (2.2.2 (f) (i))

Headlamp aim beam image kick up to the offside both headlight lenses were twisted and the beam image was kicking up to the right. (1.6)

Rear reflector on motorcycle missing (1.4.1)

Headlamp aim headlamp deteriorated and function impaired ns and os, (1.2.3a)

Rear Footrest missing passenger foot peg missing (6.2.1a)

Rear Rear reflector on motorcycle missing (1.4.1)

front brake reservoir low level

os footage mounting loose

seat insecure

slight movement in handlebar mountings

steering catching on front fairing

Front Roller brake test indicates a binding brake (3.3.A1a)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Dip switch sticking

Drive chain slightly loose (6.2.1d)

Fairing insecure on l/h side

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Nearside Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))