2007 Mazda 6

Offside Front floor pan corroded

Rear sub frame corroded

Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Service brake excessively fluctuating (1.2.1 (e))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Both rear brake hoses has corrosion to ferrules (borderline pass), advise replace it

Nearside Front Anti-roll bar linkage corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Outer Tyre slightly damaged/cracking or perishing tyre sidewall (5.2.3 (d) (ii))

Nearside Rear Hydraulic brake calliper corroded but not seriously weakened (1.1.16 (d) (i))

Offside Front Anti-roll bar linkage corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Hydraulic brake calliper corroded but not seriously weakened (1.1.16 (d) (i))

Rear Sub-frame corroded but not seriously weakened Rear sub-frame and all arms are corroded (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive All rear sub-frame mounting areas and both rear inner sills jacking points are corroded (5.3.6 (a) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Both rear brake hoses has corrosion to ferrules (borderline pass), advise replace it

Nearside Front Anti-roll bar linkage corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Outer Tyre slightly damaged/cracking or perishing tyre sidewall (5.2.3 (d) (ii))

Nearside Rear Hydraulic brake calliper corroded but not seriously weakened (1.1.16 (d) (i))

Offside Front Anti-roll bar linkage corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Hydraulic brake calliper corroded but not seriously weakened (1.1.16 (d) (i))

Rear Sub-frame corroded but not seriously weakened Rear sub-frame and all arms are corroded (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive All rear sub-frame mounting areas and both rear inner sills jacking points are corroded (5.3.6 (a) (i))

Brake slack adjuster advise adjustment (1.1.18 (a))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Macpherson strut corroded but not seriously weakened n/s/f+ o/s/f (5.3.3 (b) (i))

Rear suspension component corrosion

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Macpherson strut corroded but not seriously weakened n/s/f+ o/s/f (5.3.3 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Rear suspension component corrosion

Nearside Front Anti-roll bar linkage worn but not seriously weakened (2.4.G.1)

Nearside Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Trailing arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Under-trays fitted obscuring some underside components

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)