MOT Status
ExpiredMileage
150,421 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Engine covers fitted obscuring some components in the engine bay
Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Parking brake lever has little reserve travel (3.1.6b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Under-trays fitted obscuring some underside components
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
centre / rear exhaust clamp corroded and broken but system supported at time of inspection
corrosion to underbody components and panels
ns rear wheel arch corroded but no sharp edges at time of inspection. Passed and advised
sill guards and splash guards limiting access to preacribed areas / items
Offside Front Brake pipe excessively chafed (3.6.B.2c)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Engine covers fitted obscuring some components in the engine bay
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Front rear brake fluctuating, but not excessively (3.7.B.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Under-trays fitted obscuring some underside components
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
centre / rear exhaust clamp corroded and broken but system supported at time of inspection
corrosion to underbody components and panels
rear wheel arches corroded but no sharp edges at time of inspection. Passed and advised
sill guards and splash guards limiting access to preacribed areas / items
Engine covers fitted obscuring some components in the engine bay
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside front brake juddering slightly (3.7.A.2b)
Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Under-trays fitted obscuring some underside components
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
all suspension and underbody panels / components are starting to corrode
Offside Front front brake binding (3.7.B.1)
Rear registration plate character(s) likely to be misread (6.3.4b)
Rear registration plate deteriorated (6.3.1d)
Engine covers fitted obscuring some components in the engine bay
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside front brake juddering slightly (3.7.A.2b)
Nearside rear brake juddering slightly (3.7.A.5b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Under-trays fitted obscuring some underside components
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
all suspension and underbody panels / components are starting to corrode
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside front brake binding (3.7.B.1)
Offside front parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Exhaust system not adequately supported (7.1.1)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front registration plate character(s) likely to be misread (6.3.4b)
Rear registration plate character(s) likely to be misread (6.3.4b)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BD03 RWN is a 2003 Mazda 6 in Silver with a 1,798cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 60%.
Across all 2003 Mazda 6 models, the average MOT pass rate is 71.6% with a typical mileage of 83,392 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying BD03 RWN, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 23 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BD03 RWN?
You can check the full history of BD03 RWN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BD03 RWN registered?
BD03 RWN is a 2003 Mazda 6, first registered on 4 July 2003.
Is BD03 RWN safe to buy?
The MOT history for BD03 RWN shows 15 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BD03 RWN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BD03 RWN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.