1985 Austin Mini Ritz

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

screen cracked outside swept area

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Steering rack gaiter split (2.2.D.2d)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

screen cracked outside swept area

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

windscreen cracked outside the swept area

Driver's seat cannot be secured in the upright position. (6.2.A.2)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front Passenger's seat cannot be secured in the upright position. (6.2.A.2)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

windscreen cracked outside the swept area

Front Exhaust has a major leak of exhaust gases (7.1.2)

Front Exhaust system not adequately supported (7.1.1)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Hazard warning switch faulty (1.4.B.1d)

Nearside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Trailing arm has excessive play in a pin/bearing (2.4.G.2)

Nearside Windscreen wiper blade insecure (8.2.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Trailing arm has excessive play in a pin/bearing (2.4.G.2)

Offside Rear fog lamp not working (1.3.2b)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Steering rack gaiter split (2.2.D.2d)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Lower Ball joint has excessive play (2.2.B.1f)

Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Lower Ball joint has excessive play (2.2.B.1f)

Offside Front Suspension has inadequate clearance with the bump stop (2.4.A.1a)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Registration plate lamp not working (1.1.5c)

Nearside Front Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Front Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Rear Vehicle structure has slight corrosion (6.1.A.1)