1991 Honda Civic Crx

Exhaust noisy (8.1.1 (a))

Interior removed. Rear seats and belts removed. Roll cage fitted.

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Passenger seat(s) missing at time of test rear seats, roll cage fitted ()

Passenger seat(s) missing at time of test Passenger front seat and both rear seats removed. Roll cage fitted. ()

Rear seats/corresponding belts removed at time of test

Exhaust noisy (8.1.1 (a))

Rear Passenger seat(s) missing at time of test both seats and corresponding belts removed ()

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

hand brake efficiency only just meets requirements.

rear seats and seat belts removed at time of test

Front Front position lamp(s) incorrect colour (1.1.A.3e)

Offside Rear Brake hose excessively chafed (3.6.B.4d)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

rear seats and seat belts removed at time of test

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

no rear seats at time of test

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Brake hose stretched (found during steering lock to lock check) (2.2.D.2b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Registration plate lamp not working (1.1.5c)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp does not operate immediately when selected on dipped beam (1.7.4a)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Registration plate lamp not working (1.1.5c)

Offside Stop lamp not working (1.2.1b)

Front bumper insecure

Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Oil leak

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front position lamp(s) not working (1.1.A.3b)

n/s inner c/v boot split

n/s inner c/v boot split