MOT Status
ExpiredMileage
79,894 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe inadequately clipped or supported front to rear over propshaft (1.1.11 (d) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced chassis rail (6.1.1 (c) (i))
Horn not working (7.7 (a))
Nearside Front Direction indicator not working (4.4.1 (a) (ii))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Windscreen washer not working (3.5 (a))
Brake pipe inadequately clipped or supported front to rear over propshaft (1.1.11 (d) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced chassis rail (6.1.1 (c) (i))
Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Battery insecure and likely to cause a short circuit (4.13 (a) (ii))
Central Rear Registration plate lamp inoperative in the case of a single lamp or all lamps not working (4.7.1 (b) (ii))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Parking brake inoperative on one side (1.4.1 (a))
Offside Front Driver's door hinge insecure corroded around top hinge (6.2.3 (c) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Rear Other passenger door does not latch securely closed tail gate (6.2.3 (a))
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch holed behind head lamp (6.1.1 (c) (ii)) DANGEROUS
Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis outrigger (6.1.1 (c) (ii)) DANGEROUS
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering door step to sill plus outer sill holed (6.1.1 (c) (ii)) DANGEROUS
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch (6.1.1 (c) (ii)) DANGEROUS
Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis (6.1.1 (c) (ii)) DANGEROUS
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis above front spring mount (6.1.1 (c) (ii)) DANGEROUS
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis by anti role bar mount (6.1.1 (c) (ii)) DANGEROUS
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering in multiple places (6.1.1 (c) (ii)) DANGEROUS
Central Front number plate as a small crack
Nearside Front door hinge
Nearside Front tyre small cracks
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch by chassis (6.1.1 (c) (i))
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis by anti roll bar (6.1.1 (c) (i))
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced slam panel (6.1.1 (c) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i))
Offside Front Position lamp not working (4.2.1 (a))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i))
Offside Rear Position lamp not working (4.2.1 (a))
Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced inner & outer sill (6.1.1 (a) (i))
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Anti-roll bar has excessive play in a pin/bush anti roll bar bush (2.4.G.2)
Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis in two places plates corroded and holed (6.1.A.1)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Anti-roll bar has excessive play in a pin/bush anti roll bar bush (2.4.G.2)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Steering rack gaiter split (2.2.D.2d)
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wing panel holed (6.1.A.1)
Offside Rear Rear position lamp(s) not working (1.1.A.3b)
Rear passenger door cannot be opened from outside the vehicle tail gate (6.2.B.1c)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Exhaust has a minor leak of exhaust gases silencer (7.1.2)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Front Windscreen wiper not operating automatically when switched on (8.2.1b)
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering floor to sill (6.1.A.1)
Nearside Rear Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis (6.1.A.1)
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis to spring mount (6.1.A.1)
Nearside Rear rear brake binding (3.7.B.1)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement track control arm anti roll bar rubber (2.4.G.2)
Offside Rear Stop lamp not working (1.2.1b)
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis (6.1.A.1)
Offside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2)
Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis (6.1.A.1)
Rear passenger door catch insecure tail gate (6.2.B.2)
Nearside Exhaust has a minor leak of exhaust gases silencer (7.1.2)
Centre Exhaust has a minor leak of exhaust gases joint (7.1.2)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement track control arm / anti role bar rubber (2.4.G.2)
Offside Front Steering rack gaiter deteriorated (2.2.D.2d)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis (6.1.A.1)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering front spring mount (6.1.A.1)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to sill (6.1.B.2)
Rear Exhaust has a major leak of exhaust gases silencer holed (7.1.2)
Steering component is not secure to the vehicle structure steering lock insecure (2.2.B.1a)
passenger door does not latch securely closed tail gate (6.2.B.1a)
Centre Exhaust has a minor leak of exhaust gases joint (7.1.2)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement track control arm / anti role bar rubber (2.4.G.2)
Offside Front Steering rack gaiter deteriorated (2.2.D.2d)
vehicle is very heavily plated
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Rear position lamp(s) not working (1.1.A.3b)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Rear position lamp(s) not working (1.1.A.3b)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Emissions not tested (7.3.A.1)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Nearside Front position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)
Nearside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.C.1b)
Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Service brake: efficiency below requirements (3.7.C.1a)
Brake performance not tested (3.7.A.1) DANGEROUS
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1) DANGEROUS
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1) DANGEROUS
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Vehicle structure has slight corrosion (6.1.A.1)
Offside Vehicle structure has slight corrosion (6.1.A.1)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brake hose has slight corrosion to ferrules (3.6.B.4e)
Brake pipe slightly corroded (3.6.B.2c)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
extensive welding has been done to this vehicle and undersealed
Emissions not tested (7.0)
Exhaust has a major leak of exhaust gases (7.1.2)
Brake hose has slight corrosion to ferrules (3.6.B.4e)
Brake pipe slightly corroded (3.6.B.2c)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
extensive welding has been done to this vehicle and undersealed
Brake hose has slight corrosion to ferrules (3.6.B.4e)
Brake pipe slightly corroded (3.6.B.2c)
Centre Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
welding has been done throughout vehicle and heavly undersealed
Body has a sharp edge caused by corrosion (6.1.C.1)
Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust system not adequately supported (7.1.1)
Horn not working (1.6.2a)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front wheel bearing rough when rotated (2.5.A.2)
Nearside Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt affected by an insecure seat fixing (5.2.1b)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp aim not tested (1.8.A.1c)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Mechanical brake component has restricted free movement (3.5.1k)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2) DANGEROUS
Brake hose has slight corrosion to ferrules (3.6.B.4e)
Brake hose slightly deteriorated (3.6.B.4d)
Brake pipe slightly corroded (3.6.B.2c)
Centre Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak
Play in steering rack inner joint(s)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Standard fitment seat belt missing
Exhaust has a major leak of exhaust gases (7.1.2)
Horn not working (1.6.2a)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear registration plate deteriorated (6.3.1d)
Centre Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Horn not working (1.6.2a)
Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Brake hose has slight corrosion to ferrules (3.6.B.4e)
Brake hose slightly deteriorated (3.6.B.4d)
Brake pipe slightly corroded (3.6.B.2c)
Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Front Suspension arm has slight play in a track control arm inner bush (2.5.B.2b)
Rear Suspension arm has slight play in a pin/bush (2.4.G.2)
Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Steering rack gaiter split (2.2.D.2d)
Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Coolant leak
Fuel pipe/s corroded
Centre Rear Brake pipe excessively corroded (3.6.B.2c)
Centre Rear Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Steering rack gaiter insecure (2.2.D.2d)
Offside Front Steering system has excessive free play detected at the steering wheel (steering rack fitted) (2.2.A.1b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Coolant leak
Fuel pipe/s corroded
Nearside Headlamp not in a clean condition affecting beam image (1.2.4a)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Body has slight corrosion (6.1.B.2)
Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps (1.7.4b)
Nearside Front Steering rack gaiter split (2.2.D.2d)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Capri?
Based on 101,843 MOT tests across 11,827 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
B12 TGH is a 1985 Ford Capri in Red with a 1,593cc petrol engine. This vehicle has been through 36 MOT tests with a personal pass rate of 50%.
Across all 1985 Ford Capri models, the average MOT pass rate is 73.3% with a typical mileage of 56,904 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Capri fails its MOT is brake binding, accounting for 4,143 recorded failures. If you're considering buying B12 TGH, it's worth having these areas checked by a mechanic before committing.
The Ford Capri typically stays on UK roads for around 57 years. At 41 years old, this Ford Capri is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of B12 TGH?
You can check the full history of B12 TGH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was B12 TGH registered?
B12 TGH is a 1985 Ford Capri, first registered on 11 February 1985.
Is B12 TGH safe to buy?
The MOT history for B12 TGH shows 36 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does B12 TGH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on B12 TGH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.