2010 Yamaha Yzf

Drive chain excessively loose (6.1.7 (c) (i))

Rear Brake pedal anti-slip provision missing (1.1.2 (c))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front Direction indicator lens defective which has no effect on emitted light both front lens missing, indicators working fine. (4.4.1 (b) (i))

Offside Front screen has a crack in it/front fairing cracked.

Headlamp aim too high (4.1.2 (a))

Headlamp not working on main beam (4.1.1 (a) (ii))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear reflector missing (4.8.2 (a) (ii))

Exhaust noisy (7.1.2)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Number Plate Light dosent operate

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear reflector on motorcycle missing (1.4.1)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Exhaust noisy (7.1.2)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Number Plate Light dosent operate

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Steering headbearing has slight free play (2.2.2)

Drive chain excessively loose (6.2.1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))