2007 Mazda 3

Emissions unable to be completed (8.2.1.2 (d))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust system insecure (6.1.2 (a))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Service brake excessively binding (1.2.1 (f))

Front Exhaust shield missing where fitted as original equipment creating a risk of fire (6.1.3 (e)) DANGEROUS

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside headlight cloudy

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside headlight cloudy

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

exhaust heat shield loose

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Service brake lagging in operation (1.2.1 (d))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Tyre worn close to legal limit/worn on edge both 195/60r15 (5.2.3 (e))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Rear Exhaust mounting defective (6.1.2 (a))

Front Tyre worn close to legal limit/worn on edge both 195/60r15 (5.2.3 (e))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 195/60r15 (5.2.3 (d) (i))

Front Tyre worn close to legal limit/worn on edge both 195/60r15 (5.2.3 (e))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Play in steering rack inner joint(s) ()

Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

both front tyres wearing on inner edge

Nearside Rear Tyre worn close to the legal limit and has a nail in (4.1.E.1)

Offside Rear Tyre worn close to the legal limit and has a nail in (4.1.E.1)

front and rear tyres have different aspect ratios

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Front front brake application uneven (3.7.B.2)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Rear exhaust bracket is corroded.

Vehicle's internal headlight adjuster altered to recheck lights