2013 Honda Cbf 125 M-d

Front All direction indicators not working (4.4.1 (a) (ii))

Offside Front Motorcycle structure joining/attachment plate or fastening insecure fairing lose (6.1.1 (b) (i))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear All direction indicators not working (4.4.1 (a) (ii))

Rear Brake pedal has insufficient reserve travel (1.1.2 (a))

Rear Drive chain worn to excess (6.1.7 (c) (i))

Rear Position lamp not working (4.2.1 (a))

Rear Registration plate inscription illegible (0.1 (b))

Rear Stop lamp not working (4.3.1 (a) (ii))

Rear Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced fairings (6.1.1 (b) (ii)) DANGEROUS

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Drive chain slightly loose (6.1.7 (c) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Registration plate lamp insecure (4.7.1 (c) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Registration plate deteriorated but not likely to be misread (0.1 (b))

All direction indicators not working (4.4.1 (a) (ii))

Drive chain slightly loose (6.1.7 (c) (i))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Tyre worn close to the legal limit (4.1.3(ii))

Drive chain excessively loose (6.2.1d)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Clutch lever shortened. (6.2.1g)