2011 Proton Savvy

exhaust back box corroded

Fuel system component leaking fuel filter (6.1.3 (b) (i))

back exhaust box condition

Brake pipe corroded, covered in grease or other material All pipes coated (1.1.11 (c))

Sub-frame corroded but not seriously weakened front and rear (5.3.3 (b) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits 36% (8.2.1.2 (a))

Brake pipe corroded, covered in grease or other material All pipes greased (1.1.11 (c))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement offside and nearside rear bushes deteriorated (5.3.4 (a) (i))

Front Service brake binding but not excessively (1.2.1 (f))

Front Suspension component mounting prescribed area is corroded but not considered excessive offside and nearside (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened axle beam (5.3.3 (b) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits 36% (8.2.1.2 (a))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Front Service brake excessively fluctuating (1.2.1 (e))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Brake pipe corroded, covered in grease or other material All pipes greased (1.1.11 (c))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement offside and nearside rear bushes deteriorated (5.3.4 (a) (i))

Front Service brake binding but not excessively (1.2.1 (f))

Front Suspension component mounting prescribed area is corroded but not considered excessive offside and nearside (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened axle beam (5.3.3 (b) (i))

Brake performance not tested due to tyre valve blowing out during test (1.2.1 (g))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Valve stem seriously damaged Blown out during mot test (5.2.3 (j)) DANGEROUS

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Rear Exhaust has a minor leak of exhaust gases Joint (6.1.2 (a))

Rear Suspension arm corroded but not seriously weakened Beam axle (5.3.3 (b) (i))

Offside Rear rear brake binding (3.7.B.1)

Power steering pipe(s) or hose(s) leaking from a joint (2.3.3b)

Front Power steering component(s) has slight seepage from a component (2.3.3b)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)