2008 Cpi Supermoto

Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Upper Shock absorber has a slightly worn bush (5.3.2 (c))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Nearside Rear Drive chain slightly loose (6.1.7 (c) (i))

Offside Front Brake lever is short but brake can still be readily applied END BROKEN OFF (1.1.2 (d))

Rear Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Central Front Headlamp aim too high (4.1.2 (a))

Central Front Headlamp insecure (4.1.1 (c))

Nearside Rear Footrest missing (6.2.12 (a))

Offside Rear Footrest missing (6.2.12 (a))

Rear Rear reflector missing (4.8.2 (a) (ii))

Rear Shock absorber has an excessively worn bush TOP & BOTTOM BUSHES WORN (5.3.2 (c))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Nearside Rear Drive chain slightly loose (6.1.7 (c) (i))

Offside Front Brake lever is short but brake can still be readily applied END BROKEN OFF (1.1.2 (d))

Rear Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Brake performance not tested (1.2.1 (g))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Shock absorber has an excessively worn bush (5.3.2 (c))

Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Rear reflector missing (4.8.2 (a) (ii))

Direction indicator damaged but function not impaired l/h rear (1.5.3a)

Rear wheel bearings have slight free play (2.4.A.2c)

Clutch lever shortened so it cannot be readily operated. (6.2.1g)

Handlebar handgrip not secure to handlebars. l/h (2.1.1c)

Headlamp aim too high (1.6)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Steering lock stop ineffective r/h (2.1.3)

Steering lock stop missing r/hand (2.1.3)

Brake pad(s) less than 1.5 mm thick front (3.2.A1f(i))

Direction indicator damaged but function not impaired l/h rear (1.5.3a)

Rear wheel bearings have slight free play (2.4.A.2c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Drive chain excessively loose (6.2.1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Wheel alignment incorrect which adversely affects the handling (2.5.1)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front wheel bearings have slight free play (2.3.5b)

None std indicators fitted

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front wheel bearings have slight free play (2.3.5b)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

None std indicators fitted

Rear reflector on motorcycle missing (1.4.1)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Headlamp aim too high (1.6)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear suspension bearing has slight free play (2.4.A2a(i))

Rear wheel bearings have slight free play (2.4.A.2c)

Upper Rear mono-shock pivot worn but not excessive (2.4.B.4)