2003 Yamaha DT125

Front Front wheel bearings are slightly rough (2.3.5b)

Rear shock absorber has inadequate damping effect. (2.4.A.3b) DANGEROUS

Exhaust is leaking but is not excessively noisey (7.1.1b)

front flexi mounting bolts missing

slight leak front forks

slight leak rear shocker

some play rear shocker bush

Front Drive chain sprocket worn to excess (6.2.1e)

Front shock absorber seal failed and leaking oil (2.3.3)

Front wheel bearings have excessive free play (2.3.5b)

Front wheel spindle securing nut locking device missing (2.3.3a)

Lower Rear suspension bush has excessive free play (2.4.A2a(i))

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear wheel spindle securing nut locking device missing (2.4.A.2b)

Rear wheel spindle securing nut(s) loose (2.4.A.2b)

Upper Front suspension assembly component loose (2.3.1)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust is leaking but is not excessively noisey (7.1.1b)

front flexi mounting bolts missing

Brake performance not tested (3.3)

Front Front suspension assembly component excessively misaligned (2.3.1)

Front Tyre is incorrectly seated on the wheel rim (4.1.2b)

Front Tyre is unsuitable (4.1.1)

Front suspension has excessive stiffness in the suspension movement. (2.3.6b)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Lower Rear mono-shock pivot excessively worn (2.4.B.4)

Rear Registration plate deteriorated (6.3.1d)

Rear Tyre is unsuitable (4.1.1)

Rear reflector on motorcycle missing (1.4.1)

Rear wheel bearings have excessive free play (2.4.A.2c)

Front Brake disc(s) excessively worn (3.2.A1l) DANGEROUS

Rear Brake caliper(s) insecure (3.2.A1j) DANGEROUS

Rear Brake reaction bracket insecure (3.2.A1j) DANGEROUS

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b) DANGEROUS

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a) DANGEROUS

Chain guard missing

Front Brake hose slightly deteriorated (3.2.B3b)

Rear Brake disc(s) slightly worn (3.2.A1l)

Steering headbearing has slight free play (2.2.2)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Registration plate incorrect (6.3.1a)

Drive chain excessively loose (6.2.1d) DANGEROUS

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Front Wheel has an excessively distorted bead rim. (4.2.2) DANGEROUS

Front position lamp does not illuminate immediately when switched on (1.1.3a) DANGEROUS

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c) DANGEROUS

Offside Handlebar handgrip not secure to handlebars. (2.1.1c) DANGEROUS

Rear Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h) DANGEROUS

Front wheel bearings have slight free play (2.3.5b)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Headlamp aim too high (1.6)

Front Floor brake test indicates a binding brake (3.3.C2c)

Front wheel bearings have excessive free play (2.3.5b)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Floor brake test indicates a binding brake (3.3.C2c)

Registration plate letter/figure incomplete (6.3.1c)

Front wheel bearings have excessive free play (2.3.5b)

Rear Tyre worn close to the legal limit (4.1.3(ii))