2005 Honda SES125

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front tyre slightly perished in treads

Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Headlamp aim too low (1.6)

Nearside Front Direction indicator slightly discoloured (1.5.1b)

Offside Front Direction indicator slightly discoloured (1.5.1b)

Front Roller brake test indicates a sticking brake (3.3.A1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b)

Front Brake hose slightly deteriorated Ferrules Corodded (3.2.B3b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1a)

Wheel alignment slightly misaligned. (2.5.1)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake lever has inadequate reserve travel (3.1.3b)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Horn not working (1.7.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Roller brake test indicates a binding brake (3.3.A1a)