2003 Jaguar S-type

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mount (5.3.6 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

covers fitted underneath the vehicle

Offside Rear Shock absorbers has an excessively worn bush (5.3.2 (c))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

covers fitted underneath the vehicle

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill to floor (5.3.6 (a) (i))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor to sill (5.3.6 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Outer Suspension rod ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Outer Suspension rod ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Outer Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Outer Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

all brake discs corroded and in poor condition

All brake discs corroded and in poor condition.

Front Brake pad(s) wearing thin (3.5.1g)

Plastic covers fitted not allowing full inspection of testable items.

Very slight play/wear in near side rear and off side rear anti-roll bar ball joints.

Front Brake pad(s) wearing thin (3.5.1g)

Front and rear brake discs corroded and in poor condition.

Near side front, off side front, near side rear and off side rear brake flex hose ferrules corroding.

Front tyres wearing badly in inner edge.

Metal parts of near side front, off side front, near side rear and off side rear brake flex hoses corroding and in poor condition.

Near side front, off side front, near side rear and off side rear brake discs corroded and in poor condition.

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Plastic covers fitted not allowing full inspection of testable items.

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front tyres wearing badly in inner edge.

Metal parts of near side front, off side front, near side rear and off side rear brake flex hoses corroding and in poor condition.

Near side front, off side front, near side rear and off side rear brake discs corroded and in poor condition.

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Plastic covers fitted not allowing full inspection of testable items.

offside rear tyre has small cuts to tread

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)