2008 Mazda 3

Rear Exhaust mounting defective (6.1.2 (a))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Underside of vehicle is corroded

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Inner Wheel arch rubbing on tyre

Front Flexi exhaust deteriorating

Sump corroding

Nearside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Front Flexi exhaust deteriorating

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Tyre close to legal limit and has cuts in tread

Sump corroding

Nearside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front lower suspension arm bush deteriorated but not resulting in excessive movement

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front lower suspension arm bush deteriorated but not resulting in excessive movement

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Inner Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Inner Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Lower Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Lower Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Offside rear tyre is wearing unevenly on the inner edge

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Lower Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Lower Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Offside rear tyre is wearing unevenly on the inner edge

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)