2012 Mazda 6

Nearside Rear Brake pipe corroded, covered in grease or other material corroded before flexi (1.1.11 (c))

Nearside Rear Tyre slightly damaged/cracking or perishing cracked inner and outer edge (5.2.3 (d) (ii))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush worn (5.3.4 (a) (i))

Nearside Rear Suspension arm pin or bush excessively worn lower front control arm inner bush (5.3.4 (a) (i))

Nearside Rear Tailgate component damaged and likely to cause injury reverse lamp damaged and has sharp edges (6.2.1 (a) (i))

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure bulged inner edge of tread (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Brake pipe corroded, covered in grease or other material corroded before flexi hose (1.1.11 (c))

Nearside Rear Reversing lamp lens defective such that emitted light is adversely affected lens broken (4.6.1 (b))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Tyre slightly damaged/cracking or perishing tyre cracked inner edge of tread (5.2.3 (d) (ii))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement lower front control arm inner bush (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge worn inner edge (5.2.3 (e))

Nearside Rear Body component damaged and likely to cause injury inner lamp damaged causing sharp edges (6.2.1 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps both (4.7.1 (b) (ii))

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure bulge outer sidewall (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre worn close to legal limit/worn on edge worn inner edge (5.2.3 (e))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Headlamp aim unable to be tested (4.1.2 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Tyre has ply or cords exposed ply exposed inner edge (5.2.3 (d) (ii)) DANGEROUS

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Front tyres appear to be incorrect size, 205 fitted should be 215

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened OS worn. NS very worn (1.1.14 (a) (ii))

Front Brake pedal appears have more travel than normal

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Front tyres appear to be incorrect size, 205 fitted should be 215

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

front tyres starting to wear on edges