2009 Honda Cbf 125 M-9

Aftermarket exhaust fitted

Clutch lever in poor condition but serviceable

Drive chain too tight

Front mudguard cable tied on but secure

Rear tyre fitted wrong way round but no markings

All direction indicators adversely affected by the operation of another lamp (4.4.3 (b))

Drive chain excessively loose (6.1.7 (c) (i))

Front Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Nearside Rear Footrest missing (6.2.12 (a))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Central Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Nearside Front Clutch lever shortened (6.2.7 (b))

Offside Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Side stand stiff in operation

Central Motorcycle structure is corroded but structural rigidity is not significantly reduced Central stand corroded (6.1.1 (c) (i))

Rear Position lamp light intensity obviously reduced Advise rear lamp lens (4.2.3 (a) (i))

brakes slightly binding due to lack of use.

Brake lever is short but brake can still be readily applied (3.1.3c)

Drive chain slightly loose (6.2.1d)

Brake lever is short but brake can still be readily applied (3.1.3c)

Drive chain slightly loose (6.2.1d)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Horn not working (1.7.3a)

High beam indicator light not working.

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Wheel alignment slightly misaligned. (2.5.1)