2007 Alfa Romeo Brera

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear brake slight binding

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Service brake excessively binding (1.2.1 (f))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Oil leak, but not excessive Engine (8.4.1 (a) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Offside Headlamp aim too high (4.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Oil leak, but not excessive Engine (8.4.1 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced mount (6.1.1 (c) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Exhaust mounting defective (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge on limits (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

slight corrosion to both rear inner sills

Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Windscreen washer not working (3.5 (a))

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge on limits (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

slight corrosion to both rear inner sills

Brake discs all rusty on surface

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front front brake fluctuating, but not excessively (3.7.B.3)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Under-trays fitted obscuring some underside components

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear rear brake binding (3.7.B.1)

Registration plate lamp not working (1.1.C.1d)

Under-trays fitted obscuring some underside components

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nail in offside front tyre

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Sub-frame corroded but not seriously weakened (2.4.G.1)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear brakes are binding slightly

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Headlamp not working on dipped beam (1.7.5a)

emissions too clean

offside front tyre worn on inside edge

offside washers blocked