2004 Honda Cbr

Rear Motorcycle structure is corroded but structural rigidity is not significantly reduced sub frame (6.1.1 (c) (i))

Rear Suspension arm corroded but not seriously weakened swing arm (5.3.3 (b) (i))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Drive chain worn but not considered excessive (6.2.1e)

Rear Tyre worn close to the legal limit (4.1.3(i))

Front Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Drive chain worn but not considered excessive (6.2.1e)

Rear Tyre worn close to the legal limit (4.1.3(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Brake disc(s) slightly worn (3.2.A1l)

Headlamp switch faulty (1.2.4)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))