1982 Mercedes-benz 240

Boot lid insecure (6.2.1 (a) (i))

Central Exhaust system insecure (6.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear inside wheel arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired outer wheel arch (6.2.2 (d) (ii)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Bulkhead rusty

Front lower valence rusty

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Outer driveshaft gaiter split

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Inner Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floorpan (7.1.1 (a) (i))

Nearside Windscreen washer not working (3.5 (a))

Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Body component corroded and likely to cause injury wheelarch (6.2.1 (a) (i))

Offside Windscreen washer not working (3.5 (a))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Outer driveshaft gaiter split

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Nearside Stop lamp(s) showing white light to the rear (4.3.3 (a) (ii))

Offside Headlamp aim too low (4.1.2 (a))

Offside Inner Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Rear Outer driveshaft gaiter split

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

hole in nearside front door

hole in offside front door

Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)

Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Rear Outer driveshaft gaiter split

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

hole in nearside front door

hole in offside front door

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Main beam 'tell-tale' not working (1.7.4c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear position lamp(s) has a product on the lens so it is not visible from a reasonable distance (1.1.A.3d)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

rear brake application uneven (3.7.B.2)

All doors corroded

Body badly corroded

Play in steering box

Radiator zip tied in

Rear self levelling suspension replaced with standard shocks/springs

Rear subframe bushes deteriorated

n/s/r light lens broken

Nearside Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

All doors corroded

Body badly corroded

Play in steering box

Radiator zip tied in

Rear self levelling suspension replaced with standard shocks/springs

Rear subframe bushes deteriorated

n/s/r light lens broken

Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Front registration plate missing (6.3.1a)

Nearside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded anti roll bar (2.4.A.3)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front coil spring broken (2.4.C.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too high (1.8)

Nearside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Brake hose bulging under pressure (3.6.B.3)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Brake pipe leaking (3.6.A.1)

Nearside Rear Fluid suspension pipe inappropriately repaired (2.4.A.2)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Suspension component mounting prescribed area is excessively corroded anti roll bar (2.4.A.3)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Fluid suspension pipe inappropriately repaired (2.4.A.2)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Fluid suspension levelling valve leaking (2.4.D.2)

Rear Fluid suspension pipe leaking (2.4.D.2)

Service brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

front brake application uneven (3.7.B.2)

All doors corroded

Body badly corroded

Play in n/s/f lower ball joint

Play in steering box

Radiator zip tied in

Rear brake discs corroded

Rear subframe mounting bushes deteriorated

corrosion n/s/f sill outer

n/s/r light lens broken