2015 Honda Glr

Brake component inadequately mounted rear brake arm not tight and split pin missing (1.1.21 (c))

Drive chain excessively loose (6.1.7 (c) (i))

Headlamp not working on main beam (4.1.1 (a) (ii))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Drive chain sprocket so loose it is likely to fail rear sprocket bolt loose (6.1.7 (c) (ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Drive chain sprocket worn, but not excessively cush drive rubbers > rear sprocket carrier (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced rear swing arm rusty and corroded (6.1.1 (c) (i))

engine bearings noisy

main stan worn and not return fully>hang low close to road surface

Slight oil leak from valve cover

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Rear Tyre is unsuitable Tyre not fitted in compliance with the manufacturer's sidewall instructions (5.2.3 (a))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))