2012 Honda Cbf 125 M-b

Stop lamp not working foot pedal switch need adjusting (4.3.1 (a) (ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Drive chain slightly tight (6.1.7 (k) (i))

front tyre perished and in poor condition, manufacture date 2016

Motor cycle rear side panels not secure.

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Motorcycle structure is corroded but structural rigidity is not significantly reduced Rear swinging arm and rear brake torque bar surface corroded. (6.1.1 (c) (i))

Steering head race top protection plastic cover damaged.

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Brake excessively binding Rear brake drum brake arm pivot partly seized. (1.2.1 (f))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Handlebar deformed to the extent that steering is affected Handlebar fouling fairing near side. (2.2.1 (c) (ii)) DANGEROUS

Nearside Front Left hand handle bar mirror insecure.

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Motorcycle structure is corroded but structural rigidity is not significantly reduced Rear swinging arm and rear brake torque bar. (6.1.1 (c) (i))

Rear motorcycle side panels at the rear damaged and insecure.

Steering head race top protection cover damaged.

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Unable to check headlamp aim as dip beam not working.

Drive chain slightly loose (6.1.7 (c) (i))

Headlamp aim too low Headlamp adjuster screw insecure (1.6)

Front Headlamp aim too high headlamp aim too high (1.6)

Rear Rear reflector on motorcycle missing reflector missing (1.4.1)