2010 Yamaha Yzf

Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Exhaust noisy (8.1.1 (a))

Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Exhaust noisy (8.1.1 (a))

Rear reflector missing (4.8.2 (a) (ii))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Headlamp light intensity reduced Headlight covers fitted. (4.1.4 (a))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Front Tyre was completely flat at time of test, had to reinflate to continue.

Brake pedal is bent but can still be readily applied

Exhaust noisy

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear reflector on motorcycle missing (1.4.1)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Stop lamp does not emit a steady light (1.3.1b)

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Exhaust noisy (7.1.2)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Number plate starting to de-laminate in the centre section

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Rear suspension bush has slight free play (2.4.A2a(i))

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front position lamp incorrect colour (1.1.2a)

Number plate starting to de-laminate in the centre section

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Rear suspension bush has slight free play (2.4.A2a(i))

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Rear suspension bush has slight free play (2.4.A2a(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))