2008 Piaggio Zip

Rear shock has slightly reduced damping

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake excessively binding (1.2.1 (f))

Headlamp aim too high and too far to the right (4.1.2 (a))

Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Centre stand worn

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Centre stand worn

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Position lamp not working (4.2.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Stop lamp not working (4.3.1 (a) (ii))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Front wheel bearings have slight free play (2.3.5b)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Brake hose is likely to be fouled or trapped by moving parts (3.2.B2c)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear reflector on motorcycle missing (1.4.1)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Tyre worn close to the legal limit (4.1.3(i))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

rear position, n/s bulb not working

cannot see front inner brake pad, i suspect pad is worn low because of condition of front disc surface and the noise it makes when rotated . caliper will need to be removed to check brake pad condition .

slight bind on front brake .