MOT Status
ExpiredMileage
154,610 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Rear Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front Suspension component corroded and seriously weakened (5.3.3 (b) (i))
Offside Front Suspension component corroded and seriously weakened (5.3.3 (b) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Vehicle structure is fractured and structural rigidity is significantly reduced front and rear (6.1.1 (a) (i))
Body not fully secure (6.2.2 (a) (i))
Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Vehicle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))
Vehicle structure is fractured but structural rigidity is not significantly reduced (6.1.1 (a) (i))
Vehicle structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))
Battery insecure and likely to cause a short circuit (4.13 (a) (ii))
Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Vehicle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))
Vehicle structure is fractured but structural rigidity is not significantly reduced (6.1.1 (a) (i))
Vehicle structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))
Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Bonnet primary retaining device ineffective (3.1 (c))
Headlamp not working on main beam (4.1.1 (a) (ii))
Horn not working (7.7 (a))
Nearside Rear All direction indicators not working (4.4.1 (a) (ii))
Offside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))
Steering rack has excessive free play detected at the steering wheel (steering rack fitted) Lower u/j (2.3 (a) (i))
Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Rear Inner Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Driver's door catch deteriorated so the door cannot be readily opened or closed (6.2.3 (c) (i))
Offside Front Cab steps insecure (6.2.8 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Nearside Front Lower Suspension arm ball joint likely to become detached no locking device (5.3.4 (a) (ii)) DANGEROUS
Offside Front Cab steps insecure (6.2.8 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Brake load sensing valve linkage defective and function impaired (1.1.17 (a))
Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Bonnet retaining device ineffective (8.4.2)
Brake load sensing valve inoperative (3.6.E.3)
Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Rear Suspension spring mounting prescribed area is excessively corroded Spring mount (2.4.A.3)
Rear Suspension spring mounting prescribed area is excessively corroded Both rear (2.4.A.3)
Rear Suspension spring mounting prescribed area is severely distorted Shackle mounts both rear (2.4.A.3)
Nearside Front Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside front brake fluctuating, but not excessively (3.7.B.3)
bonnet safety catch stiff
offside front outer sill badly corroded, but not in prescribed area
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Lower Sub-frame corroded and seriously weakened spring seat (2.4.G.1)
Offside Outer Rear position lamp(s) not working (1.1.A.3b)
Offside Rear fog lamp not working (1.3.2b)
Parking brake: efficiency below requirements (3.7.B.7)
Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Inner Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Outer Tyre worn close to the legal limit (4.1.E.1)
Offside front brake fluctuating, but not excessively (3.7.B.3)
bonnet safety catch seized
chassis corroded ,but not excessively
offside outer sill corroded, but not in prescribed area
parking brake figures. n/s 224, o/s 97
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front body mounting bolt loose
Rear light mounting board corroded
Vehicle structure has slight corrosion rear cross members (6.1.A.1)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Rear fog lamp not working (1.3.2b)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front body mounting bolt loose
Rear light mounting board corroded
Vehicle structure has slight corrosion rear cross members (6.1.A.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
centre propshaft bearing bush splitting
o/s/f back plate corroded for brake disc
slight play in diff pinion
wires broken for o/s/r wear warning for pads
Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.A.3)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Rear brake drum contaminated by oil (3.5.1h)
Nearside Rear position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Shock absorber has a serious fluid leak (2.7.3)
Offside Front Upper Front position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)
Offside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Parking brake: efficiency below requirements (3.7.B.7)
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
o/s/r tailboard post broken
play in rear diff pinion bearing
spare tyre missing
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
n/s/r brake slightly binding
shock damp o/s/f
Nearside Front Steering rack gaiter split (2.2.D.2d)
Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
n/s/r brake slightly binding
shock damp o/s/f
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Shock absorber has a light misting of oil (2.7.3)
brake pipe greased
Brake pipe excessively corroded (3.6.B.2c)
Brakes imbalanced across an axle (3.7.B.5b)
Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
rear brake application uneven (3.7.B.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Shock absorber has a light misting of oil (2.7.3)
front brake discs corroded
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
rear anti-roll bar bushes have slight play
How Reliable is the Iveco Daily?
Based on 817,098 MOT tests across 76,231 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AU54 BXK is a 2004 Iveco Daily in White with a 2,800cc diesel engine. This vehicle has been through 32 MOT tests with a personal pass rate of 56.3%.
Across all 2004 Iveco Daily models, the average MOT pass rate is 64.0% with a typical mileage of 109,442 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Iveco Daily fails its MOT is parking brake: efficiency below requirements, accounting for 54,319 recorded failures. If you're considering buying AU54 BXK, it's worth having these areas checked by a mechanic before committing.
The Iveco Daily typically stays on UK roads for around 30 years. At 22 years old, this Iveco Daily is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of AU54 BXK?
You can check the full history of AU54 BXK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AU54 BXK registered?
AU54 BXK is a 2004 Iveco Daily, first registered on 21 September 2004.
Is AU54 BXK safe to buy?
The MOT history for AU54 BXK shows 32 tests with a 56.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AU54 BXK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AU54 BXK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.