2017 Qingqi Qm

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Headlamp aim too low (4.1.2 (a))

Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition Corroded and blowing. (8.1.1 (a))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement Suspension linkage (5.3.4 (a) (i))

Rear Wheel alignment slightly misaligned (2.4 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Exhaust silencer slightly loose Clamp missing and join deteriorating (8.1.1 (b) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Offside Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Upper Shock absorber has a slightly worn bush (5.3.2 (c))

Rear Wheel has a slightly distorted bead rim slight lateral rim distortion (5.2.2 (c) (i))

Throttle grip deterioating

Drive chain worn to excess (6.1.7 (c) (i))

Front Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii))

Front Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Exhaust silencer slightly loose Clamp missing and join deteriorating (8.1.1 (b) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Offside Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Upper Shock absorber has a slightly worn bush (5.3.2 (c))

Rear Wheel has a slightly distorted bead rim slight lateral rim distortion (5.2.2 (c) (i))

Throttle grip deterioating

Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Wheel has a slightly distorted bead rim Rim eccentric (5.2.2 (c) (i))

Suspension pin, bush or joint worn but not resulting in excessive movement Rear suspension linkage bearing worn (5.3.4 (a) (i))

COVID-19 6 MONTH EXTENSION