2012 Honda Cbf 125 M-b

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Tyre worn close to the legal limit on legal limit (5.2.3 (e))

Front Brake excessively binding (1.2.1 (f))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Rear Stop lamp not working (4.3.1 (a) (ii))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Headlamp switch does not immediately illuminate all dipped beam headlamps switch not latching correctly (4.1.3 (a))

Headlamp switch does not immediately illuminate all main beam headlamps switch sticking (4.1.3 (a))

Rear Tyre worn close to the legal limit on legal limit (5.2.3 (e))

starter switch insecure

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Drive chain sprocket slightly worn (6.2.1e)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Drive chain sprocket slightly worn (6.2.1e)

Front Brake area contaminated by oil or grease.

Drive chain worn but not considered excessive (6.2.1e)

Steering movement slightly 'notchy' (2.2.1b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Wheel alignment slightly misaligned. (2.5.1)

Headlamp aim too high (1.6)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii)) DANGEROUS

Wheel alignment slightly misaligned. (2.5.1)