2008 Piaggio Nrg

Front Brake excessively binding (1.2.1 (f))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Tyre worn close to the legal limit (5.2.3 (e))

Front suspension stiff in operation

Rear Brake excessively binding (1.2.1 (f))

Front Suspension component modified so the suspension is inoperative (5.3.3 (c) (ii)) DANGEROUS

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Tyre tread not clearly visible (5.2.3 (e))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake grabbing severely (1.2.1 (c))

Fuel system component leaking (6.1.3 (b) (i))

Stop lamp emits other than a steady red light (4.3.3 (a) (i))

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Steering movement slightly 'notchy' (2.2.1a)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Steering movement slightly 'notchy' (2.2.1b)

Front suspension assembly has slight free play between the sliding members (2.3.4)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering movement slightly 'notchy' (2.2.1a)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Wheel alignment slightly misaligned. (2.5.1)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Wheel alignment slightly misaligned. (2.5.1)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Steering movement slightly rough. (2.2.1a)

Wheel alignment slightly misaligned. (2.5.1)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Rear Stop lamp does not emit a steady light (1.3.1b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Steering movement slightly rough. (2.2.1a)

Wheel alignment slightly misaligned. (2.5.1)

Indicator switch defective (1.5.4)